Oval Nestabilities - Information and Sizes

OVALS

Ovals are a little different than circles. For a start there are two sets of ovals:

Classic and Petite.

They not only have a different amount of scallops, they are also different in shape. The Petite shape with 37 edges is more oval shaped than the Classic that has 22 edges. You could describe them as the Classic Scallop being a rounded oval and the Petite being a longer narrower oval.

The Largest die in the Classic Ovals measures approx. 4" x 3.1/l6"
The Largest die in the Petite Ovals measures approx. 4.75" x 3.75"

Therefore, you need the right Standard Oval to fit the right Scallop Oval

Standard Classic Oval Large (S4 -110)
co-ordinates with Classis Oval Scallop Large (S4 -111)

Standard Classic Oval Small (S4-112)
co-ordinates with Classic Oval Scallop Small (S4-113)

Standard Petite Oval Large (S4-138)
co-ordinates with Petite Oval Scallop Large (S4-139)

Standard Petite Oval Small (S4-140)
co-ordinates with Petite Oval Scallop Small (S4-141)

------------

Deckled Edge Classic Oval - S4-259

A Nestabilities® set of five Ovals, all with edges resembling torn paper. The Deckled Edge Classic Ovals LG coordinate with the S4-110 Classic Ovals LG and S4-112 Classic Ovals SM for stacking and layering.
The difference between die template sizes within a Nestabilities set is ½", which becomes a ¼" border when layering. The difference between LG and SM Nestabilities sets is ¼".

Approximate Die Template Sizes:
1: 1⅛ x ¾"
2: 1¾ x 1¼"
3: 2⅜ x 1¾"
4: 3⅛ x 2⅜"
5: 3¾ x 2⅞
-------------------


Big Scalloped Ovals Large S4-251

This set of 5 Nestabilities® die templates features scalloped cutting and embossing edges in an Oval shape. Big Scalloped Ovals LG have 10 half circle curves along the outer edge of the Oval shape. Big Scalloped Ovals LG will bring a soft and delicate look to your oval art.


Big Scalloped Ovals LG stack and layer with the S4-112 Classic Ovals LG and S4-252 Big Scalloped Ovals SM die template sets.

The difference between die template sizes within a Nestabilities set is ½", which becomes a ¼" border when layering. The difference between LG and SM Nestabilities sets is ¼". Combining both the LG and SM sets of Nestabilities will allow for ⅛" borders when layering.

Approximate Die Template Sizes:
1: 1⅛ x ¾"
2: 1¾ x 1⅜"
3: 2½ x 1⅞"
4: 3¼ x 2½"
5: 4 x 3"
-------------

Big Scalloped Ovals Small - S4-252

This set of 5 Nestabilities® die templates features scalloped cutting and embossing edges in an Oval shape. Big Scalloped Ovals SM have 10 half circle curves along the outer edge of the Oval shape. Big Scalloped Ovals SM will bring a soft and delicate look to your oval art.

Big Scalloped Ovals SM stack and layer with the S4-114 Classic Ovals SM and S4-251 big Scalloped Ovals LG die template sets.
The difference between die template sizes within a Nestabilities set is ½", which becomes a ¼" border when layering. The difference between LG and SM Nestabilities sets is ¼". Combining both the LG and
SM sets of Nestabilities will allow for ⅛" borders when layering.
Approximate Die Template Sizes:
1: ¾ x ½"
2: 1½ x 1⅛"
3: 2⅛ x 1⅝"
4: 2¾ x 2⅛"
5: 3⅝ x 2⅝"
--------------------------

Beaded Ovals - S4-294

Designed to coordinate with Classic Ovals, these Decorative Elements Nestabilities® feature a scalloped edge filled with an embossed circle, or bead. The edge detail has even spaced embossed beads all the way around each die template in the four piece set. Beaded Ovals nest for making elegant frames. Cut/emboss and stencil onto the oval center or layer with Classic Ovals for versatility and elegance.

Approximate Die Template Sizes:
1: ⅞ x ¾"
2: 1⅜ X 1¾"
3: 2¼ x 2⅞"
4: 3⅜ x 4¼
------------------

Crown Ovals - S4-303

Coordinating with Classic Ovals, these Decorative Elements Nestabilities® feature embossed tip crown points that encircle each embossed circle to give a regal look. This four piece set nests for elegant frames, or can be used individually, with stamped images or embellishments in the center oval.


Approximate Die Template Sizes:
1: ¾ x ⅞"
2: 1½ x 1¾"
3: 2½ x 3⅛"
4: 4 x 4¾"
-----------------

Grand Ovals - LF-110

This set of Grand Ovals coordinates with the original Nestabilities® S4-110 Classic Ovals LG, and stack and layer with LF-111 Grand Scalloped Ovals.


Grand Nestabilities are designed for use in the Grand Calibur™ Die Cutting System. Spellbinders™ Grand Nestabilities cut, emboss and stencil perfect shapes that mix and match with original Nestabilities sizes. Larger shapes offer endless possibilities for scrapbooking, school projects, mini albums and more!

The difference between die template sizes within a Nestabilities set is ½”, which becomes a ¼” border when layering. The Grand Nestabilities increase in size from the original set, and maintain the same increments between die templates.

Estimated Shipping Date: October 2010
Approximate Die Template Sizes:
1: 3¼ x 4¼"
2: 3¾ x 5"
3: 4¼ x 5⅝"
4: 4¾ x 5⅞"
5: 5¼ x 6⅞"
6: 5¾ x 7½"
----------------------

Grand Scalloped Ovals - LF-111

This set of Grand Scalloped Ovals coordinates with the original Nestabilities® S4-111 Classic Scalloped Ovals, and stack and layer with LF-110 Grand Ovals.


Grand Nestabilities are designed for use in the Grand Calibur™ Die Cutting System. With Spellbinders Grand Nestabilities cut, emboss and stencil perfect shapes that mix and match with regular Nestabilities. Larger shapes offer endless possibilities for scrapbooking, school projects, mini albums and more!

The difference between die template sizes within a Nestabilities set is ½”, which becomes a ¼” border when layering. The Grand Nestabilities increase in size from the original set, and maintain the same increments between die templates.

Estimated Shipping Date: October 2010

Approximate Die Template Sizes:
1: 3⅝"
2: 4¼ x 5⅜"
3: 4¾ x 6⅛"
4: 5⅞ x 7½"
5: 5¼ x 6¾"
6: 6½ x 8¼"
--------------------------

The numbers of the sets are from the Spellbinder web site.

If you had both sets of Large and Small there would be 1/8" difference between the dies if the sets were layered inside each other.

If only one set the different between the dies would be 1/4"