So on we go with the second part of this tutorial.......
The larger MFP (modifying folder pad)- see Part 1)
Place card in folder with MFP over the pattern and emboss as before
Your finished embossed card will look like this- If you want to see how I finished my card - pop over to ikki's corner - link on the side bar.
Having completed the embossing process of the 6 x 4 card, I going to take this idea on further and use the technique on a square card.
I used a 5.1/2 square card. Place the folder at the edge of your open card with the MFP positioned over the folder pattern and emboss . Keep hold of the MFP until the roller engages.
Now with the card open - place the folder towards the middle of the card lining up the pattern to the edge of the previous embossing. Unfortunately, although this piccy shows the folder in the right position - the folder SHOULD BE UPSIDE DOWN - CUTTLEBUG LOGO AT THE BOTTOM - (as we have done before) so you get the right pattern in the right place! It's that jet lag again (that's my excuse anyway).
Place the small portion MFP over the folder pattern and emboss as usual, taking care to hold the MFP in place until it engages the roller.
Unfortunately, as you will see there is a small area where the pattern does not work out, but ... you can touch this up with a ball embossing pen.